Thermal Dynamics Cutmaster 60i #1-5631-1 w/ 50' Torch
![](https://www.weldersupply.com/Content/files/ProductImages/VictorLogo.png)
Cut capacity:
![1/2" Capacity](https://www.weldersupply.com/Content/files/ProductImages/C-450-12_THL.png)
1/2" Capacity
Plasma torch:
![Handheld](https://www.weldersupply.com/Content/files/FilterIcons/Handheld.png)
Handheld
Power supply:
![220V Single Phase](https://www.weldersupply.com/Content/files/ProductImages/C-649-220VSinglePhas_THL.png)
220V Single Phase
![220V 3 Phase](https://www.weldersupply.com/Content/files/ProductImages/C-649-220V3Phase_THL.png)
220V 3 Phase
![460V](https://www.weldersupply.com/Content/files/ProductImages/C-649-460V_THL.png)
460V
Material type:
![Mild Steel](https://www.weldersupply.com/Content/files/ProductImages/643-NewCat-MildSteel_THL.png)
Mild Steel
![Stainless Steel](https://www.weldersupply.com/Content/files/ProductImages/643-NewCat-Stainless_THL.png)
Stainless Steel
![Aluminum](https://www.weldersupply.com/Content/files/ProductImages/643-NewCat-Aluminum_THL.png)
The Cutmaster® 60i is the newest addition to the plasma Cutmaster line. The Cutmaster 60i is the perfect combination of end-user insight, advanced technology, and intelligent design. Packed with power and offering the highest power-to-weight ratio in its class, the Cutmaster 60i also has best in class cutting arc length and the most empowering and engaging user experience no matter the application.
Pierces | 5/8 in. (16 mm) |
Recommended Cut | 5/8 in. (16 mm) |
Model | Input Power Cable and Plug | Work Lead with Ground Clamp |
Description or Qualifier | single phase 8AWG 3/C with NEMA 6-50P Plug | #8 work cable with 50 mm connection |
Height | 14.15 in. 593 mm |
14.15 in. 593 mm |
Length | 21.12 in. 9 ft 2.7 m 536 mm |
20 ft 21.12 in. 536 mm 6 m |
Width | 7.85 in. 199 mm |
7.85 in. 199 mm |
Frequency Hz | 50/60 Hz |
Phases | 1 |
VAC | 208-480 ± VAC |
Amps | 43 A |
Volts | 208 V |
Amps | 39 A |
Volts | 230 V |
Amps | 19 A |
Volts | 480 V |
Minimum Air Supply | 6.2-8.3 bar (90-120 psi) |
Open Circuit VAC High | 300 VAC |
Operating Temperature | 0 - 50 °C (32 - 122 °F) |
Output Current AC | 10 - 60 A |
Output Power | 7.6 kW |
Amp High | 60 A |
Duty Cycle | 50 % |
Amp High | 50 A |
Duty Cycle | 60 % |
Amp High | 40 A |
Duty Cycle | 100 % |
Gas Flow | 300-500 cfh (8520-14100 l/min) |
Gas Pressure | 6.2-8.3 bar (90-125 psi) |
Gas Requirements | Compressed Air |
Weight | 16.8 kg (37 lb) |
Amperage Output 10–60 A, continuously adjustable
Rated Output Power 7.6 kW
Open-Circuit Voltage (OCV) 300 V
Input Voltage 208–480 VAC ± 10%
Number of Phases 1 ph
Supply Frequency 50/60 Hz
Rated Duty Cycle
50% @ 60 A
60% @ 50 A
100% @ 40 A
Amperage Draw
43 A @ 208 V
39 A @ 230 V
19 A @ 480 V
Enclosure Rating IP23S
Input Power Cable and Plug 9 ft. (2.7 m) single phase 8 AWG 3/C with NEMA
6-50P Plug
Work Lead with Ground Clamp 20 ft. (6 m) #8 work cable with 50 mm connection
Gas Requirements Compressed air
Operating Temperature Range 32°F–122°F (0°C–50°C)
Input Pressure 90–125 psi max (8.6 bar)
Air Flow Requirements (cutting and gouging) 300–500 scfh / 5–8.3 cfm (142–235 l/s)
Power Supply Gas Filtering Ability Particulates to 5 Microns
Recommended Cut 5/8 in. (16 mm)
Maximum Sever 1 1/2 in. (38 mm)
Pierce Rating 5/8 in. (16 mm)
Torch Duty Cycle 100% at 60 A @ 400 scfh air flow
Torch Air Pressure 75 psi (5.2 bar)
Torch Air Consumption 6.7 cfm (190 l/s)
Torches (for use with the Cutmaster 60i)
SL60QD 1Torch (supplied)
SL60/SL100 1Torch
SL100 Mechanized 1Torch
SL100SLV Automated 1Torch
SHIPPING DIMENSIONS |
|
Height: | 22.00 Inches |
Width: | 12.00 Inches |
Length: | 20.00 Inches |
Weight: | 40 Lb(s) 0 Oz |