SuitCase® 12RC,3S Preflow/5S Postflow, Trigger hold, Burn back, BTB 300A Gun Pkg #951599
![](https://www.weldersupply.com/Content/files/ProductImages/MillerLogo_THL.png)
Welding type:
![Mig](https://www.weldersupply.com/Content/files/ProductImages/C-9-MigWelders_THL.png)
Mig
Material type:
![Mild Steel](https://www.weldersupply.com/Content/files/ProductImages/643-NewCat-MildSteel_THL.png)
Mild Steel
![Stainless Steel](https://www.weldersupply.com/Content/files/ProductImages/643-NewCat-Stainless_THL.png)
Portable feeder for MIG welding with standard remote voltage control, for applications where the feeder is within 100 feet of the power source and control cords are acceptable.
Saves the operator a trip back to the power supply for welding adjustments. For applications where the feeder is within 100 feet of the power source and control cords are acceptable.
Heavy-duty drive motor with tachometer control provides wire feed speed that is accurate and consistent from the start of the weld to the finish and from one weld to the next, which provides consistent arc quality. Wide voltage range for small and large wires with no contactor chatter or arc outages.
Impact-resistant, flame-retardant case provides strength and durability, and protects components and welding wire from moisture, dust and other contaminants. Built-in slide rails allow you to drag the feeder into position for welding. Innovative feeder door design allows you can change wire while feeder is standing upright or laying down.
Potted and trayed main printed circuit board for the harshest environment adds exceptional reliability. Board has full-trigger isolation so a shorted gun trigger will not affect feeder operation. Gun locking tab works with guns having corresponding locking grooves to prevent gun from being pulled out if the feeder is dragged by the gun. Gas inlet recessed into back of case is protected from incidental contact by the weld cable, ensuring consistent and contaminant-free shielding gas delivery to the gun. Double-filtered gas valve helps keep dirt from clogging and affecting gas flow.
Make loading the wire easy and does not deform the wire on the way into the drive rolls improving wire feeding performance.
Provides easy adjustment and consistent pressure on the drive rolls and wire.
Display voltage, wire feed speed, and also amperage if desired. Meters can be seen clearly even in direct sunlight.
Title | SuitCase® 12RC,3S Preflow/5S Postflow, Trigger hold, Burn back, BTB 300A Gun Pkg |
---|---|
Industries Interests | Aerospace Construction Heavy Equipment Manufacturing Infrastructure Manufacturing Railcar Shipbuilding Boat / Yacht High Purity Processing |
Cooling | Air-Cooled |
Input Circuit Welding Rating | 425 A at 100% Duty Cycle |
Power Source Compatibility | DC |
Spool Size | 12 in (305 mm) |
Welding Power Source Type | CV |
Wire Feeder Type | Portable |
Wire Feed Speed | 50 IPM - 780 IPM |
Wire Diameter | Solid Wire 0.023 in 0.052 in Flux Cored 0.03 in 0.078 in |
Net Width | 9 in |
Net Height | 15.5 in |
Net Length | 21 in |
Net Weight | 31 lbs |
Warranty | Miller's True Blue Warranty |
Portability | Handle(s) |
SHIPPING DIMENSIONS |
|
Height: | 16.00 Inches |
Width: | 17.00 Inches |
Length: | 26.00 Inches |
Weight: | 47 Lb(s) 0 Oz |
Stop engine on welding generator.
Loosen gun securing knob and insert gun power pin into gun block. Power pin should be as close as possible to drive rolls without touching. Align gun power pin groove with gun locking tab and tighten gun securing knob. If gun power pin doesn’t have a groove, loosen knob to rotate the gun locking tab 180 degrees to prevent dun locking tab from interfering with gun power pin when inserted into the gun block.
Gun is now ready for use.