Hypertherm 600V Powermax 125 Plasma Cutter #059551
![](https://www.weldersupply.com/Content/files/hypertherm/v-b920-HyperthermLogo-THL.png)
Cut capacity:
![1" and Higher Capacity](https://www.weldersupply.com/Content/files/ProductImages/C-450-1_THL.png)
1" and Higher Capacity
Plasma torch:
![Handheld](https://www.weldersupply.com/Content/files/FilterIcons/Handheld.png)
Handheld
Power supply:
![460V](https://www.weldersupply.com/Content/files/ProductImages/C-649-460V_THL.png)
460V
Material type:
![Mild Steel](https://www.weldersupply.com/Content/files/ProductImages/643-NewCat-MildSteel_THL.png)
Mild Steel
![Stainless Steel](https://www.weldersupply.com/Content/files/ProductImages/643-NewCat-Stainless_THL.png)
Stainless Steel
![Aluminum](https://www.weldersupply.com/Content/files/ProductImages/643-NewCat-Aluminum_THL.png)
The Powermax 125 Plasma Cutter (part #059536) is an extremely powerful, high-performance unit, ready for even the most demanding cutting and gouging. This version of the cutter takes an input voltage of 600 Volts and boasts a CPC port and voltage divider for cutting applications.
Get unparalleled productivity with cut speeds five times faster than oxyfuel on 12mm mild steel. The Powermax 125 has 125 amps of power and a recommended hand cutting rating of 1.5.” With a 100% duty cycle, you’ll be able to truly maximize cutting time. New, patented designs improve the airflow for better cooling, improving the cut quality and resulting in long consumable life -- as much as four times longer life than other systems with similar amperage.
Cut Charts for Hypertherm Powermax125 Plasma Cutter for mild steel, stainless steel & aluminum.
Error Codes and Faults for Hypertherm Powermax 125
The Powermax 125 system Duramax™ Hyamp machine torches work with automated equipment for faster, reliable cutting and piercing work. These can be used for portable automation, x-y table cutting, and robotic cutting and gouging. The machine torches can be set up with universal mounting brackets.
Always check operating guides for recommended height, power, and speed adjustments.
Register your Hypertherm products for safety, education and service support.
Contact Welders Supply Company at 1-844-682-0205 for more information.
Specifications | |
---|---|
Input voltages | 480/600 V, 3-PH, 50/60 Hz |
Input current @ 21.9 kW | 480/600 V, 31/24 A |
Output current | 30-125 A |
Rated output voltage | 175 VDC |
Duty cycle @ 104° F (40° C) | 100% @ 125 A, 480/600 V, 3-PH |
Open circuit voltage (OCV) | 320 VDC |
Dimensions with handles | 23.3" D; 10.8" W; 20.0" H |
Weight w/ 25' torch |
400 V - 105.7 lbs 600 V - 104.7 lbs |
Gas supply | Clean, dry, oil-free air or nitrogen |
Recommended gas inlet flow rate/pressure |
Cutting: 260 l/min (550 scfh) @ 5.9 bar (85 psi) Gouging: 212 l/min (450 scfh) @ 4.1 (60 psi) |
Input power cable length | 10' |
Power supply type | Inverter - IGBT |
Engine drive requirement | 40 kW for full 125 A output |
Certifications | CSA-certified for use in the Americas and Asia, except China |
Warranty | Power supplies have a 3-year warranty and torches a 1-year warranty |
Capacity |
Thickness |
Cut Speed |
---|---|---|
Cutting | ||
Recommended | 1½" | 18 ipm |
1 ¾” | 10 ipm | |
Severance (hand cutting) | 2 ¼” | 5 ipm |
Pierce* | 1" | |
*Pierce rating for handheld use or with automatic torch height control |
Capacity |
Metal removal rate |
Groove profile* |
---|---|---|
Gouging | ||
Typical gouge | 27.6 lbs/hr | 0.17-0.31" D x 0.24-0.390" W |
*Actual groove profile varies with torch angle, arc stretch, and technique |
SHIPPING DIMENSIONS |
|
Height: | 20.00 Inches |
Width: | 20.00 Inches |
Length: | 10.80 Inches |
Weight: | 105 Lb(s) 0 Oz |