ESAB Rogue EM140 MIG Welder 0700301081
ESAB Rogue EM 140 is an inverter-based MIG welding system designed to address all your welding project needs, from light fabrication to repair and maintenance. The system features industrial-grade arc performance and full featured controls that allow the welder to fine tune arc characteristics based on the material they are welding. With a weight of only 13 kg (28.8 lbs), single voltage 120V single-phase input and compatibility with 6 kVA generators, this system provides maximum flexibility and portability, both in the shop and in the field.
Rogue EM takes single-phase welders to the next level with MIG/MAG and Flux-cored welding, proven Rogue performance and a rugged industrial design. Break away from convention with Rogue and upgrade the capabilities of your shop.
Features:
- Large 14 Segment Display –instantaneous feedback for both voltage and wire feed speed for clear viewing
- Unique rugged industrial design –supporting multiple lift points and cable management.
- Arc Dynamics -fine tune arc characteristics based on the material being welded
- Advanced control features –adjustable pre-and post-flow, burn back control, creep start and 2T/4T trigger latch
- Spool Gun Ready –Rogue automatically configures set up when spool gun is connected
- IP23S rated for indoor/outdoor use
Package Includes:
- 140A MIG/MAG power source
- TwecoFusion 180 MIG Torch 3 m (10 ft)
- Victor Gas Regulator/Flow gauge
- Return cable kit, OKC 35-50 16 mm2
- 3 m (10 ft), Gas Hose 3 m (10 ft)
- ESAB OK AristoRod 12.50 0.8mm (0.030) 1kg (2.2lbs)
- Feed rolls 0.6/0.8 mm (0.023/0.030 in.) V (fitted), 0.8/0.9 mm (0.030/0.035 in.) V and 0.8/0.9 mm (0.030/0.035 in.) V
- Instruction manual
Shop welding machines, fume extractors and welding helmets available at Welders Supply.
ESAB Rogue EM 140 - Specifications | |
---|---|
Voltage | 120 VAC 1, 50/60 Hz |
GMAW Welding Output | 90 A / 18.5 V @ 30 % Duty Cycle 64 A / 17.2 V @ 60 % Duty Cycle 49 A / 16.5 V @ 100 % Duty Cycle |
Current Range | 30-140 A |
Voltage Range | 12-22 V |
Wire Feeder Specifications | 2.0-11.4 m/min ( 75-450 in./min ) |
Open Circuit Voltage | 50 VDC |
Metal Mild Steel Stainless Steel Cored Wire Aluminum |
0.6-0.9 mm ( 0.023-0.035 in. ) 0.6-0.9 mm ( 0.023-0.035 in. ) 0.8-0.9 mm ( 0.030-0.035 in. ) 0.8-0.9 mm ( 0.030-0.035 in. ) |
Max Spool Diameter | 100 & 200 mm ( 4 & 8 in. ) |
Power Factor at Maximum Current | 0.80 |
Efficiency at Maximum Current | 82.7 % |
Energy Save Mode | 20 W |
Enclosure Class | IP23S |
Certification Mark | cETLus |
Industries |
|
SHIPPING DIMENSIONS |
|
Height: | 18.65 Inches |
Width: | 19.00 Inches |
Length: | 25.60 Inches |
Weight: | 51 Lb(s) 8 Oz |
Consumables
Product Questions and Answers
Have a question about this product? Submit your question using the form below
Related Products
Competitive Products
People who bought this product were also interested in:
- MIG Welders
- ESAB
- Flux Core Welders
- Arc Welders
- Electric Welders
- Portable Welders
- Aluminum Welders
- Steel Welders
- For Cast Iron
- For Thick Metal
- For Thin Metal
- Fabrication Welders
- For Everything
- Car Repair Welders
- For DIY Projects
- For Garage Use
- For Beginners
- For Students
- Professionals Welders
- Handyman Welders
- For Small Projects
- Cheap Welders
- Mild Steel
- Stainless Steel
- Aluminum
- 110V
- Best MIG Welding Machines Under $1250