ESAB RENEGADE ES 300i #0445100881
![](png/esablogo_thl.png)
Welding type:
![Stick](png/c-9-stickwelding_thl.png)
Stick
![Tig](png/c-9-tigwelding_thl.png)
Tig
Power supply:
![460V](png/c-649-460v_thl.png)
460V
Material type:
![Mild Steel](png/643-newcat-mildsteel_thl.png)
Mild Steel
![Stainless Steel](png/643-newcat-stainless_thl.png)
POWER TO THE WELDER. Renegade runs Stick and TIG and has the widest input power range on the market, making it capable of handling singleand three-phase from 208V to 480V automatically and puts out 5 - 300 amps. To top it off, Renegade has a superior working range at up to 350 ft (107 m) with minimum power loss.
WELD ON THE MOVE. As the most compact and lightweight welder in its class, Renegade is the definition of a field machine. Three handles make it easy to grab it, pull it, push it, or throw it over your shoulder with the padded strap for hard-to-reach areas with limited access.
CONVENIENCE. Intuitive interface – The machine’s digital readout display, along with large buttons and controls, make it easy to set parameters and read them from a distance n Cable management – An integrated latch system helps control cables so they can be secured to the machine, making it easy to pack up and go
PERFORMANCE. Automatic voltage detection – No need to rewire every time the machine is plugged in n Excellent cellulosic performance (E6010 and E6011) – Provides higher arc voltage and longer arc length for a soft arc with impeccable starts and stops n High-speed machine-to-arc communication – Renegade reads the arc faster than most machines, equating to better control, a more stable arc, and virtually no spatter n Arc gouging – Work with rods up to 1/4 in (6 mm) n Hot start – Automatically increases your output to avoid sticking n Arc force – To provide a softer, crisper arc
Includes: Renegade ES 300i power supply, shoulder strap, 10 ft. (3 m) input cable, 2 x OKC 50 connectors.
Efficiency Max Current |
89 % |
Process |
Stick |
Efficiency Max Current |
85 % |
Process |
Tig |
Fuse Slow - Amps |
10 A |
Fuse Slow - Amps |
20 A |
Fuse Slow - Volts |
230 V |
Frequency Hz |
50/60 Hz |
Phases |
1 |
VAC |
230-460 VAC |
Frequency Hz |
50/60 Hz |
Phases |
3 |
VAC |
230-460 ± 10% VAC |
Stick (3ph)
Duty Cycle |
40 % |
Output Current DC |
300 A |
VDC Out |
30 VDC |
Duty Cycle |
60 % |
Output Current DC |
250 A |
VDC Out |
30 VDC |
Stick (1ph/3ph)
Duty Cycle |
100 % |
Output Current DC |
200 A |
VDC Out |
28 VDC |
TIG
Duty Cycle |
40 % |
Output Current DC |
300 A |
VDC Out |
20 VDC |
Duty Cycle |
60 % |
Output Current DC |
250 A |
VDC Out |
20 VDC |
TIG (1ph/3ph)
Duty Cycle |
100 % |
Output Current DC |
200 A |
VDC Out |
18 VDC |
Output Power |
11.3 kVA |
Enclosure Class |
IP23 |
Energy Save Mode |
91 W |
Max Welding Output |
300 A |
Open Circuit VDC High |
48 V |
Power Factor Maximum Current |
0.96 % |
Setting Range (A) |
5-300 A |
Weight
Weight |
15 kg (33 lb) |
SHIPPING DIMENSIONS |
|
Height: | 12.60 Inches |
Width: | 7.90 Inches |
Length: | 18.10 Inches |
Weight: | 33 Lb(s) 0 Oz |
Insert an empty USB flash drive into the power source USB connector.
Confirm the text "USB" flashes in teh display for a moment, after which the text "USB" is shown with fixed light.
Remove USB flash drive when USM is shows with fixed light.
The USB flash drive will contain a text file (.txt) with the welding statistics. It is recommended to open this file with Microsoft WordPad or Microsoft Word.