ESAB Rebel EMP 215ic Multi-Process MIG/TIG/Stick Package 0558102240
![](png/esablogo_thl.png)
Welding type:
![Mig](png/c-9-migwelders_thl.png)
Mig
![Stick](png/c-9-stickwelding_thl.png)
Stick
![Tig](png/c-9-tigwelding_thl.png)
Tig
Power supply:
![110V](png/c-647-110v_thl.png)
110V
![220V Single Phase](png/c-649-220vsinglephas_thl.png)
220V Single Phase
Material type:
![Mild Steel](png/643-newcat-mildsteel_thl.png)
Mild Steel
![Stainless Steel](png/643-newcat-stainless_thl.png)
The Rebel™ Series Welding Machines #0558102240 offer 120/230V flexibility and some of the most innovative welding technology available. A breakthrough design inspired by professional welders, the Rebel is a complete package to weld anything – mild steel, aluminum, stainless steel – and go anywhere.
Dimensions |
Height | 16 in. (406 mm) |
Length |
23 in. (584 mm) | |
Width | 9 in. (229 mm) | |
Input Ratings |
230 V |
|
kw | 7kVA | |
120 V |
||
kw | 4.5 kVA | |
Frequency Hz | 50/60 Hz | |
Phases | 1 | |
VAC | 120, 208/230 VAC | |
Output Ratings |
MIG (GMAW) 120V |
|
Duty Cycle | 20% | |
Output Current DC | 130 A | |
VDC Out | 20.5 VDC | |
MIG (GMAW) 230V |
||
Duty Cycle | 25% | |
Output Current DC | 205 A | |
VDC Out | 24.3 VDC | |
STICK (SMAW) 120V |
||
Duty Cycle | 40% | |
Output Current DC | 90 A | |
VDC Out | 23.6 VDC | |
STICK (SMAW) 230V |
||
Duty Cycle | 25% | |
Output Current DC | 180 A | |
VDC Out | 27.2 VDC | |
TIG (GTAW) 120V |
||
Duty Cycle | 40% | |
Output Current DC | 130 A | |
VDC Out | 15.2 VDC | |
TIG (GTAW) 230V |
||
Duty Cycle | 30% | |
Output Current DC | 180 A | |
VDC Out | 17.2 VDC | |
Power Specifications |
Enclosure Class | IP23S |
Max Welding Output | 240 A | |
Open Circuit VDC High | 90 VDC | |
Setting Range MIG/MAG (V) | 10-26 V | |
Voltage Tolerance | 90-270 VAC | |
Specifications |
Standards |
CSA E60974-1-00 IEC 60974-1 |
Weight |
Weight | 18.2 kg (40 lb) |
Wire Feeder Specifications |
Max Spool Diameter | 4 & 8 in. (100 & 200 mm) |
Wire Length per Minute | 59-476 in./min (1.5-12.1 m/min) | |
Metal |
Wire Diameter |
|
Mild Steel | .023-.035 in. (0.6-0.9 mm) | |
Stainless Steel | .030-.035 in. (0.8-0.9 mm) | |
Aluminum | .030-.045 in. (0.8-1.2 mm) | |
Flux Cored | .030-.045 in. (0.8-1.2 mm) |
SHIPPING DIMENSIONS |
|
Height: | 16.00 Inches |
Width: | 9.00 Inches |
Length: | 23.00 Inches |
Weight: | 40 Lb(s) 0 Oz |
Open the side cover.
Release pressure roller arm by pushing the tension screw toward you.
Lift the pressure roller arm up.
With the MIG welding wire feeding from the bottom of the spool pass the electrode wire through the inlet guide, between rollers, through the outlet guide and into the MIG torch.
Re-secure the pressure roller arm and wire drive tension screw and adjust the pressure if necessary.
With the MIG torch lead reasonably straight, feed the wire through the MIG torch by depressing the trigger switch.
Close the side cover.