Thermal Dynamics Cutmaster 58, 20 ft. SL60QD, 208-230 VAC 1-5830-1
![](https://www.weldersupply.com/Content/files/ProductImages/VictorLogo.png)
Cut capacity:
![1/2" Capacity](https://www.weldersupply.com/Content/files/ProductImages/C-450-12_THL.png)
1/2" Capacity
Plasma torch:
![Handheld](https://www.weldersupply.com/Content/files/FilterIcons/Handheld.png)
Handheld
Power supply:
![220V Single Phase](https://www.weldersupply.com/Content/files/ProductImages/C-649-220VSinglePhas_THL.png)
220V Single Phase
![220V 3 Phase](https://www.weldersupply.com/Content/files/ProductImages/C-649-220V3Phase_THL.png)
220V 3 Phase
![460V](https://www.weldersupply.com/Content/files/ProductImages/C-649-460V_THL.png)
460V
Material type:
![Mild Steel](https://www.weldersupply.com/Content/files/ProductImages/643-NewCat-MildSteel_THL.png)
Mild Steel
![Stainless Steel](https://www.weldersupply.com/Content/files/ProductImages/643-NewCat-Stainless_THL.png)
Stainless Steel
![Aluminum](https://www.weldersupply.com/Content/files/ProductImages/643-NewCat-Aluminum_THL.png)
The Cutmaster 58 is the most powerful 1/2 in. (12 mm) machine on the market today. This unit cuts through mild, stainless, or aluminum up to 1-1/8 in. (30 mm) thick. This powerful machine combines power with the well-known performance and features of the industry-leading 1Torch®.
The Cutmaster 58 features a classic design known for reliable operation in rugged conditions. Some of the features include:
Specifications |
|
Max Amperage Output - (Amps) | 60 |
Rated Output Power - (Kw) | 6.2 |
Recommended Cut - Inches (mm) | 1/2 - " (12) |
Max Cut - Inches (mm) | 1 1/8 - " (30) |
Pierce Rating - Inches (mm) | 1/2 - " (12) |
Input Voltage - (Volts, Phase, Hz) | 208-230/460 V, 1/3 ph, 50/60 Hz 400 V, 3 ph, 50 Hz 600 V, 3 ph, 50/60 Hz |
Rated Duty Cycle |
40% @ 60A 60% @ 50A 100% @ 30A |
Amperage Draw | 45 (230V, 1 Phase) 24 (230V, 3 Phase) 16 (460V, 3 Phase) |
Dimensions (L x W x H) Inches (mm) | 24 x 12 x 15 (610 x 305 x 381) |
Weight - lbs (kg) | 43 (19.5) |
Torch Model | SL60QD |
Air Pressure - psi (bar) | 75 (5.2) |
Flow - Cfm (l/m) | 6.7 (190) |
SHIPPING DIMENSIONS |
|
Height: | 15.00 Inches |
Width: | 12.00 Inches |
Length: | 24.00 Inches |
Weight: | 43 Lb(s) 0 Oz |
The torch can be held in one hand or steadied with both hands. Position hand so you can press the Trigger on the torch handle. Hand can be positioned close to the torch head for maximum control or near the back end for maximum heat protection. Choose the most comfortable holding technique that allows good control and movement.
For edge starts, hold the torch perpendicular to the workpiece with the front of the tip on the edge of the workpiece at the point where the cut is to start. For standoff cutting, hold the torch 1/8 - 3/8 in (3-9 mm) from the workpiece.
Hold the torch away from your body and slide the trigger release toward the back of the torch handle while simultaneously squeezing the trigger. The pilot arc will start.
Bring the torch within transfer distance to the work. The main arc will transfer to the work and the pilot arc will shut OFF.
Cut as usual. Simply release the trigger assembly to stop cutting.
For consistent standoff height from workpiece, install the standoff guide by sliding it onto the torch shield cup. Install with the legs at the sides of shield cup body to ensure good visibility of the cutting arc. When cutting, position the legs of the standoff guide against the workpiece.