CK Worldwide MT200-AC/DC Tig Welding System #MT200-ACDC
![](https://www.weldersupply.com/Content/files/ProductImages/v_eabb_ckworldwide_THL.png)
Welding type:
![Tig](https://www.weldersupply.com/Content/files/ProductImages/C-9-TigWelding_THL.png)
Tig
Power supply:
![220V Single Phase](https://www.weldersupply.com/Content/files/ProductImages/C-649-220VSinglePhas_THL.png)
220V Single Phase
Material type:
![Mild Steel](https://www.weldersupply.com/Content/files/ProductImages/643-NewCat-MildSteel_THL.png)
Mild Steel
![Stainless Steel](https://www.weldersupply.com/Content/files/ProductImages/643-NewCat-Stainless_THL.png)
Stainless Steel
![Aluminum](https://www.weldersupply.com/Content/files/ProductImages/643-NewCat-Aluminum_THL.png)
The MT200-AC/DC was designed to address the needs of both creative driven and production line TIG welding. It can quickly adapt to a wide range of welding scenarios, from vocational training to aerospace and nuclear applications, all while maintaining the same high quality experience welders expect from CK Worldwide. A compact size and a weight of just 32 lbs. make it exceptionally portable. Whether you weld for fun or to pay the bills, the MT200 is ready for any welding challenge.
CK Worldwide MT200-AC/DC Tig Welding System Specs | |
---|---|
Input Voltage | 115VAC ±15%, 50/60Hz 220VAC ±15%, 50/60Hz,single phase |
Input Current (I max) | 115V: 21 Amps 220V: 34 Amps |
Output Current Range GTAW | 115V: 5 – 140 Amps 220V: 5 – 200 Amps |
Output Current Range SMAW | 115V: 10 – 110 Amps 220V: 10 – 160 Amps |
Rated Output GTAW | 115V: 140A @ 15.6V, 40% duty cycle 220V: 200A @ 18.0V, 25% duty cycle |
Rated Output SMAW | 115V: 110A @ 24.4V, 25% duty cycle 220V: 160A @ 26.4V, 30% duty cycle |
Maximum Open Circuit Volts | 74 Volts |
Gas Pre-flow | 0.5 seconds |
Gas Post-flow | 0.5 – 20 seconds |
AC Frequency | 20 – 250 Hz |
Pulse Frequency | 1 – 200 Hz |
Pulse Width | 50% |
Base Current | 10 – 100% |
Arc Start | High Frequency |
Net Height | 15 in. / 381mm |
Net Length | 20 in. / 502mm |
Net Width | 8.5 in. / 217mm |
Net Weight | 32 lb. / 14.5 kg |
Metals | Aluminum Titanium Magnesium Stainless Steel Low Alloy Steel Deoxidized Copper |
Applications | Repairs Motor Sports Off Road Fabrication Marine Customization |
Warranty | CK 3-Year Limited Warranty |
SHIPPING DIMENSIONS |
|
Height: | 15.00 Inches |
Width: | 8.50 Inches |
Length: | 21.00 Inches |
Weight: | 35 Lb(s) 0 Oz |
Turn on machine using the ON/OFF switch (back of machine).
Select the TIG function with the TIG/STICK slector switch.
Select DC using the AC?DC selector switch.
Connect the TIG torch connector to the negative terminal and tighten it.
Connect the ground cable connector into the positive terminal and tighten it.
Connect the foot pedal remote lead into the remote socket.
Connect the torch gas connector into the gas receptacle.
Connect gas regulator to the cylinder and connect gas line to the regulator.
Carefully open the valve of the gas cylinder, set the flow to 15-25CFH (7-12LMN).